MICRONEEDLING
How it works
What you need
You need a microneedling pen that penetrates up to 2.5mm. Most microneedling pens only go up to 0.25mm, which is not enough.View attachment
Wash your hands and wipe your face.
(Do not skip this )
View attachment
Apply numbing cream
Apply the numbing cream liberally to your face. This is very important. Wait at least 30-60 minutes after applying the numbing cream before performing the procedure. Your skin should feel very numb after. After you're numb, wipe remaining cream off of the skin.
View attachment
Prepare microneedling pen
Put a new cartridge IGNORE INTO the pen and set the speed and depth at the following depths for different regions:
Microneedle
Using the depths and speeds from before, microneedle on every square surface of the skin. Use the wipes to wipe any blood and prevent infection.As an example is the picture that I put under
View attachment
Hyaluronic Acid
Immediately after the procedure, applying hyaluronic acid will mitigate transepidermal water loss and support the rebuilding of your skin barrier. Wash Froalayour face before applying this.
View attachment
That’s the whole guide
Return to Zero Возвращайся Beztebya - Slowed Reverb �?Musik und Lyrics von Marc Acardipane, angel vox, Dayerteq | Spotify
A verified Halhal
@Administrator @Feuerwehr @Sink @Kaligula567 @Johan @Grilldaddy❤️ @unon
How it works
Microneedling works by creating a lot of small wounds in the skin, triggering growth factors and collagen/elastin synthesis. This is why microneeding can also increase hair growth by promoting hair growth factorsWhat you need
You need a microneedling pen that penetrates up to 2.5mm. Most microneedling pens only go up to 0.25mm, which is not enough.View attachment
- Face wipes
View attachment - Numbing cream (if you have the right pen, this procedure would be very painful without numbing cream)View attachment
- Hyaluronic Acid
- View attachment
Wash your hands and wipe your face.
(Do not skip this )
View attachment
Apply numbing cream
Apply the numbing cream liberally to your face. This is very important. Wait at least 30-60 minutes after applying the numbing cream before performing the procedure. Your skin should feel very numb after. After you're numb, wipe remaining cream off of the skin.
View attachment
Prepare microneedling pen
Put a new cartridge IGNORE INTO the pen and set the speed and depth at the following depths for different regions:
| Order | Area | Notes | Depth (mm) | Speed |
| 1 | Forehead | 1.0 | 2 | |
| 2 | Left side of face | Zygomatic area should be 1.0 mm | 1.5 | 2 |
| 3 | Bottom of face (excluding lips) | Do not microneedle lips | 1.0 | 2 |
| 4 | Right side of face | Zygomatic area should be 1.0 mm | 1.5 | 2 |
| 5 | Eyebrows, under eyes, and | 0.5 | 1 |
Microneedle
Using the depths and speeds from before, microneedle on every square surface of the skin. Use the wipes to wipe any blood and prevent infection.As an example is the picture that I put under
View attachment
Hyaluronic Acid
Immediately after the procedure, applying hyaluronic acid will mitigate transepidermal water loss and support the rebuilding of your skin barrier. Wash Froalayour face before applying this.
View attachment
That’s the whole guide
Return to Zero Возвращайся Beztebya - Slowed Reverb �?Musik und Lyrics von Marc Acardipane, angel vox, Dayerteq | Spotify
A verified Halhal
@Administrator @Feuerwehr @Sink @Kaligula567 @Johan @Grilldaddy❤️ @unon
Last edited:
